IC200PWR102 GE Professional Redundant Power Supply Module 27VA
Input Power
Redundant Power Supply Module Quick Details
Input Voltage 85 to 132 VAC with jumper installed, 120VAC nominal
176 to 264 VAC w/o jumper installed, 240VAC nominal
Input Power 27VA
Frequency 47 to 63Hz
Holdup Time 20ms
Output Voltage 5VDC, 3.3 VDC
Protection Short circuit, overload
Output CurrentTotal
3.3VDC Output
5VDC Output
1.5A maximumz
1.0A maximum
(1.5A - I3.3V ) maximum
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| ABB Module | AB Module 1756-,1759- Tourch Screen 2711- |
| Mitsubishi Drive MR- , Motor HA -,HC | Emerson MoudlesVE- ,KJ - |
| Fanuc motor A0-, Drive | Yokogawa transmitter EJA- |
| Rosemount Transmitter 3051- | Schneider Module 140- |
| Panasonic Motor , Drive MH- | Siemens Module 6ES-, Touch Screen 6AV- |
Made by General Electric Automation and Controls, the IC200PWR102
is a VersaMax expanded power supply unit with extended
functionality. This power supply unit is used to give power to
several types of devices which are connected to the backplane—input
and output modules, processing units, and network interface units,
for example. The IC200PWR102 differs from many other VersaMax power
units in that it operates primarily with alternating current (AC)
rather than direct current (DC). While this device is capable of
being a main power supply, it is also adept at functioning as a
supplementary power source when attached to a power supply booster
carrier.
The IC200PWR102 has different options in regards to input voltage.
When a jumper is installed, the input voltage can range anywhere
from 85 volts to 132 volts of alternating current, but 120 volts is
nominal. When a jumper is not installed, the input voltage range is
from 176 volts to 264 volts alternating current, with a nominal
voltage of 240 volts. Vital note: A jumper should not be used in
conjunction with 240 volts of input voltage. Doing so will cause
damage to the power module and may result in dangerous conditions.
The IC200PWR102 can safely operate at 120 volts AC without a
jumper.
The input power for this product is 27 volt-amperes, and the
frequency can range from 47Hz to 63Hz. The hold-up time is rated at
20 milliseconds; however, if this device is operating with 120
volts of input voltage without a jumper installed, this hold up
time will not be accurate. Output voltages are 3.3 volts and 5
volts, totaling in a maximum of 1.5 amperes. Limited protection
measures are supported for this device, including short circuit and
overload protection
Similar Products OF Redundant Power Supply Module
IC670ALG230 Analog Input Current 8 Pt. Grouped
IC670ALG240 Analog Input Current 16 Channel
IC670ALG620 RTD 4 Channel Isolated 3 wire
IC670ALG630 TC 8 Channel
IC670ALG310 Analog Output Voltage, 8 Channel, +/-10V, 0 to 10V
IC670ALG320 Analog Output Current/Voltage 4 Pt. Grouped
IC670ALG330 Analog Output Current, 8 Channel
IC670GBI002 Genius Bus Interface Unit (BIU)
IC670GBI102 120Vac/125Vdc Powered Genius Bus Interface Unit
IC670PBI001 Profibus Bus Interface Unit, DP 12M Baud
IC670CBL002 21" I/O Expansion Cable
IC670CBL003 Cable for Connector Style I/O Base (IC670CHS003), 2
Meter, 18 AWG, Connector on One End
IC670CBL004 Cable for Connector Style I/O Base (IC670CHS003) to TC
Cold Junction Compensation Base (IC670CHS004), 1 Meter, Mating
Connector on Both Ends
IC670MDL233 120VAC 8 PT Isolated Input
IC670MDL240 120VAC Input 16 Pt. Grouped
IC670MDL241 240VAC Input 16 pt, 2 groups of 8
IC670MDL640 24VDC Pos./Neg. Logic Input 16 Pt. Grouped
IC670MDL641 48VDC Pos./Neg. Logic Input 16 Pt. Grouped
IC670MDL642 125VDC Pos./Neg. Logic Input 16 Pt. Grouped
IC670MDL643 5/12Vdc Pos./Neg. Logic Input 16pt Grouped
IC670MDL644 24VDC Pos./Neg. Logic Fast Input 16pt Grouped
OTHER SUPERIOR PRODUCTS
FAQ
Q1. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass
production.
Q2. Do you have any MOQ limit of Industrial Servo Drives?
A: Low MOQ, 1pc is available.
Q3. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive.
Airline and sea shipping also optional.
Secondly, during the guarantee period, we will send new lights with
new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution
including re-call according to real situation.
