GE FANUC IC693MDL648 TYPICAL SCAN RATE SERIES 90-30 PROCESSOR MODULE
Technical Specifications for IC693MDL648
Brand GE Fanuc
Series Series 90-30
Part Number IC693MDL648
Module Type Discrete Input
Power Type DC
Input Voltage Range 0 to 60 VDC
Input Current (mA) 4.2
Number of Points 16
Response Time (ms) 1 ms on/1 ms off
Trigger Voltage 34 to 60 Volts
Product Lifecycle Status* Discontinued/Obsolete
About IC693MDL648
The IC693MDL648 module is a discrete input module made for the
programmable logic controllers or PLCs that are manufactured by the
GE Fanuc company. The PLC discrete input module is classified under
Series 90-30 of the GE Fanuc PLCs. It is a 48 Volts DC rated
positive
and negative logic input device with up to 16 input points. The
IC693MDL648 module features an input voltage range 0 to 60 Volts DC
while
the input current is rated as 4.2 milliamps. This 16-point PLC
discrete input module features 34 to 60 Volts of trigger voltage
while the connector
type is a terminal block connector with 20 screws that are included
with the module. The IC693MDL648 module also features 80 milliamps
of
current at 5 Volts DC or 125 milliamps of current at 24 Volts DC
when it is isolated.
The IC693MDL648 module features a baseplate comprising 3 main
parts. The 3 components on the baseplate include the circuit board
that is
mounted to the metal backplate with a plastic cover, the I/O bus
expansion cables, and the dedicated I/O communication bus. The
IC693MDL648 module's metal backplate features 4 holes that are used
for mounting the baseplate and it also comes with the retainer
slots
that mount the modules. Ideally, the GE Fanuc PLC controllers
feature up to 5 prewired I/O bus expansion cables. The signals on
the remote
baseplate backplane are optically coupled with an isolated DC-DC
power supply converter, which is provided to serve as isolation for
the
signals from the other backplanes. The IC693MDL648 module features
the power bus that connects the power supply outputs to the modules
in the baseplate. Its I/O communication bus is installed with I/O
modules over the bus. The bus connects to the I/O busses in the
expansion
and remote racks through the I/O bus expansion connectors and the
cables.
