Product Description of IC695CPE305
The IC695CPE305 is a 1 GHz CPU from the GE Fanuc PACSystems RX3i
Series. It comes equipped with an RS-232 serial port and an
embedded Ethernet interface, as well as 5 MB RAM (user memory) and
5 MB of non-volatile flash storage memory.
The controller module supports up to 512 program blocks, each of
which can be as large as 128 KB. You configure IC695CPE305 over
your Ethernet network using Proficy Machine Edition software. As
with other programmable logic controllers in this product family,
you can program this one in any of four different programming
languages (Ladder Diagram, Structured Text, C, or Function Block
Diagram). The IC695CPE305 CPU can also interpret the Serial I/O
protocol, the Modbus RTU Slave protocol, and the SNP Slave
protocol.
Labeled LED indicators on the unit housing can be green, red, off,
or blinking when the unit is powered up. This makes troubleshooting
efficient, and lets you verify system status at a glance.
IC695CPE305 can be installed in any pair of slots in the main RX3i
controller rack except for the slots with the two highest numbers
on them. The unit has a Universal Serial Bus (USB) port, but that
port supports only the transfer of application data; it is not
designed to support a "permanent" connection. Similarly, because
IC695CPE305 has less user memory than other CPUs in the RX3i
Series, if your operations routinely require you to transfer large
files, you might consider using a CPU with more user memory instead
(other CPUs in this product family have twice the memory of
IC695CPE305).
Technical Specifications of IC695CPE305
| Processing Speed: | 1 GHz |
| CPU Memory: | 5 Mbytes |
| Floating Point: | Yes |
| Power Requirements: | 3.3 VDC, 5 VDC or 24 VDC |
| Serial Protocols: | Modbus RTU Slave, SNP Slave, Serial I/O |
| Embedded Comms: | RS-232 |
The IC695CPE305 CPU is an RX3i PACSystems central processing unit
that is manufactured by GE Fanuc. Its dual PCI/Serial backplane
provides the operators with the facilities to allow their systems
to communicate with intelligent option modules and I/O modules in
their systems. It also provides facilities to transfer applications
through USB 2.0, A-type removable data storage devices. This module
offers an embedded Ethernet interface with a maximum of 2
programmer connections. The Ethernet interface comes with a 10BaseT
RT-45 port with an Ethernet data rate of 10 or 100 MB per second.
The IC695CPE305 CPU has a dual backplane that supports the RX3i PCI
and Series 90-30 style serial busses.
The IC695CPE305 Central Processing Unit comes with 5 MB of
non-volatile flash user memory. Its internal serial port or
Ethernet port can be used to communicate with the programmer
module. An optional energy pack can be used with this CPU module to
write user memory to the non-volatile storage when the system power
is interrupted. The energy pack can be mounted on the left side of
the module in Slot 0 of the rack. This module can accommodate any
amount of user memory by using its auto-located symbolic variables.
The important specifications of the IC695CPE305 module include a
power requirement of 3.3 Volts DC at 1 Amp or 5 Volts DC at 1 Amp
for different applications, a Boolean execution speed of 0.072
milliseconds per 1000 Boolean instructions, an RS-232 embedded
serial communication port, a real-time clock with a battery with an
estimated life of 5 years, and dual backplane support. It is used
to monitor and control machines and application processes in
real-time.
